Submission is not available now!
Paper Format
To help ensure formatting, please refer to the following templates for your submission. These include
PDFexpress Checking
All accepted papers must pass PDFexpress checking. The procedure is as follows:
An Online confirmation will be displayed and an email confirmation will be sent verifying your account setup. Previous users of PDF eXpress need to follow the above steps, but should enter the same password that was used for previous conferences. Verify that your contact information is valid.
IEEE requires that the PDF files submitted for the accepted papers be 100% IEEE Xplore compliant. Please make sure that you follow the Instructions on how to produce IEEE Xplore compliant PDF files.
Notes:
The PDF Check Report can be obtained via IEEE PDF eXpress at https://ieee-pdf-express.org/ . The authors may log in at IEEE PDF eXpress Login Page (Conference ID: 55193X). The copyright tranfer may be completed using the PaperPlaza Management System at https://cms.amss.ac.cn , Log in and Click Tranfer Copyright in order for your paper to be included in the proceedings. The final manuscript may be uploaded with the PDF Check Report and Copyright Form.
Kunjie Yu (yukunjie@zzu.edu.cn)
Zhengzhou University, China
Jing Liang (liangjing@zzu.edu.cn)
Zhengzhou University, China
Caitong Yue(zzuyuecaitong@163.com)
Zhengzhou University, China
Ke Chen(chenkezixf@zzu.edu.cn)
Zhengzhou University, China
LGAryb
Jing Liu (zgq_dlmu@163.com)
Guangzhou Institute of Technology, Xidian University
Jian Lou(wdzhang@sjtu.edu.cn)
Guangzhou Institute of Technology, Xidian University
xrpjON
Yuchen Jiang ( yc.jiang2016@foxmail.com)
Department of Control Science and Engineering
Harbin Institute of Technology
Hongyan Yang (Yanghy@bjut.edu.com)
Faculty of Information Technology
Beijing University of Technology
Yunsong Xu (xuyunsong20@nudt.edu.cn)
College of Intelligence Science and Technology
National University of Defense Technology
Hao Luo (hao.luo@hit.edu.cn)
Department of Control Science and Engineering
Harbin Institute of Technology
Yunsong Xu (shen.yin@ntnu.no)
Department of Mechanical and Industrial Engineering
Norwegian University of Science and Technology
wbGmGG
Ye Tian (field910921@gmail.com)
Ran Cheng (ranchengcn@gmail.com)
Xingyi Zhang (xyzhanghust@gmail.com)
inbpv4
Guanghui Wen
Southeast University
Zhisheng Duan
Peking University
Junjie Fu
Southeast University
uABhtG
Qihe Shan
Dalian Maritime University
Fei Teng
Dalian Maritime University
H7iEHq
Yi ZUO (zuo@dlmu.edu.cn)
Dalian Maritime University
Li-ying HAO (haoliying_0305@163.com)
Dalian Maritime University
Xuesong LIU (xsliu@dlmu.edu.cn)
Dalian Maritime University
a4ggMu
Yiu-ming Cheung (ymc@comp.hkbu.edu.hk)
Hong Kong Baptist University, HK, China
Yuping Wang(ywang@xidian.edu.cn)
SXidian University, China
SrUINV
Dianhui Wang (dh.wang@deepscn.com)
China University of Mining and Technology
Northeastern University, China
Wei Dai(weidai@cumt.edu.cn)
China University of Mining and Technology, China
mtz2gF
Chaoli Sun (chaoli.sun@tyust.edu.cn)
Taiyuan University of Science and Technology
Yaochu Jin(yaochu.jin@uni-bielefeld.de)
University of Surrey
kCa5YL
Yi Liu (yliuzju@zjut.edu.cn)
Zhejiang University of Technology, Hangzhou, 310023, China
Tao Yang(yangtao@mail.neu.edu.cn)
State Key Laboratory of Synthetical Automation for Process Industries, Northeastern University Shenyang, 110819,
China
Yuan Yao(yyao@mx.nthu.edu.tw)
Department of Chemical Engineering, National Tsing Hua University, Hsinchu, 30013, Taiwan
rPI1Ah
Yuezu Lv (yzlv@bit.edu.cn)
Beijing Institute of Technology
Zhou Jialing(jialingz@njust.edu.cn)
Nanjing University of Science and Technology
Guanghui Wen(ghwen@seu.edu.cn)
Southeast University
Tingwen Huang(tingwen.huang@qatar.tamu.edu)
Texas A&M University at Qatar
7yTRtL
Hongtian Chen (chtbaylor@163.com)
University of Alberta, Canada
Zhiwen Chen(zhiwen.chen@csu.edu.cn)
Central South University, China
Chao Cheng(chengchao@ccut.edu.cn)
Changchun University of Technology, ChinaSoutheast University
Qiang Liu(liuq@mail.neu.edu.cn)
Northeastern University, China
HbZbNI
Yinan Guo (nanfly@126.com)
China University of Mining and Technology, China
Shengxiang Yang(syang@dmu.ac.uk)
De Montfort University, UK
Cuie Yang(cuieyang@outlook.com)
Victoria University of Wellington, New Zealand
Botao Jiao(jesenbt@gmail.com)
China University of Mining and Technology, China
3YadnB
Qiuzhen Lin (qiuzhlin@szu.edu.cn)
Shenzhen University, China
Liang Feng(liangf@cqu.edu.cn)
Chongqing University, China
Min Jiang(minjiang@xmu.edu.cn)
Xiamen University, China
Kay Chen Tan(kctan@polyu.edu.hk)
The Hong Kong Polytechnic University, Hong Kong SAR, China
c6nezF
Weihong Ren (renweihong@hit.edu.cn)
Harbin Institute of Technology, China
Jing Li(jing.li.2003@gmail.com)
Tianjin University of Technology, China
2SVgxR
Derong Liu (erong@gdut.edu.cn)
Guangdong University of Technology, China
Bo Zhao(zhaobo@bnu.edu.cn)
Beijing Normal University, China
Bahd7Y